Daily Archives: Thursday, June 18, 2015

  • Seven Effective Tips To Maintain Pool

    Maintaining your pool and keeping it safe and hygienic for you and your friends to have a pleasure bath may sound cumbersome, but actually it means following a few steps and some attention to details.

    It is really not a big task to maintain a pool. Here are a few pool maintenance tips, which are effective and easy too:

    The first thing that you need to maintain on a daily basis is cleaning the surface water. The floating debris, leaves, dirt, insects and other dusts, if not cleaned on a daily basis, will stick to the pool floor and will be harder to remove. Use a long handled net to remove them regularly. This process is called skimming and this is an effective way not only to keep pool clean but also result in a better pool circulation. This process also lowers the requirement of chlorine in the pool water.

    Vacuum and brushing of pool edges: Weekly vacuuming is required to keep the water clean and to reduce the amount of chemicals that is needed. Also weekly brushing of the sides of the walls and tiles of the pool must be done in order to prevent deposition of algae which makes the pool floor and sides from being slippery. This is one of the most useful steps of pool maintenance. To gain more ideas about this pool maintenance you can click this for more details.

    For using pool heater, go by the manufacturer manual booklet for specific instructions. The heater might need servicing, checking and cleaning on a period basis, depending on the flow.

    Water level should be maintained and checked on a regular basis. A lot of water gets lost every day throughout the swimming session, but it is recommended to keep the water level half way up the opening of the skimmer. Make sure the water doesn’t fall below the level for the skimmer. Otherwise, the pool pumps might get damaged.

    Your pool should have the proper pH balance. This pH balance is nothing but levels of acidity and alkalinity that should remain within 0 to 14. Use a testing kit to monitor pH level of your pool. A reading between 7 and 8 is optimal, if not, try to use the right balance of chemicals to bring the pH level back to optimal.

    Check if your pool water needs to be super chlorinated. Sometimes, building up of contaminants like ammonia or nitrogen interacts with chlorine in the water and leaves a bad smell in the pool. If this happens, you need to super chlorinate or give the pool a chlorine shock.

    If you are living in a place where temperature drops below freezing, you must use an air compressor to blow water out of the pool after the swimming season is over to keep the pool healthy.